Why filter vacuum pump oil 

Why filter vacuum pump oil

In another blog post I discuss the process of filtering vacuum pump oil. But why filter vacuum pump oil?  Cleaning and removing water from your oil allows you to reuse the expensive vacuum pump oil several times.  Refilling the vacuum pump with clean oil that is free of water helps ensure the pump has a long life.  Continually operating the vacuum pump with dirty oil that contains moisture will lead to early pump failure.

In the picture below you will see vacuum pump oil in a quart jar.  This oil ran one complete freeze dry cycle before being drained into the jar,  It sat for around 24 hours to allow the water to collect at the bottom.  The cloudy mess in that jar is food particles from the food.  It is drawn out of the freeze dryer as the vacuum pump pulls a vacuum on the chamber and makes it into the oil.  You will be able to see what the oil should look like below after I discuss removing the water from the oil.

Why filter vacuum pump oil 
Why filter vacuum pump oil

Remove the water from the oil

To remove the water from the used vacuum pump oil we start by draining the used oil into a quart mason jar.  Secure a lid and ring on the jar and place it into the freezer and allow the water to freeze solid.

You can see the water under the oil in our mason jar in this picture.  This was a significant amount of water and is not typical.  This was a result of a long freeze dry cycle with a full load of very high moisture content food.

Why filter vacuum pump oil 
remove water from used vacuum pump oil

Once the water is frozen solid pour off the oil into your filter and allow the very viscous oil to drain into the toilet paper filter.  (You can see my Brita TP filter in the picture at the bottom of this page.)

After the majority of the oil is out of the mason jar and before the water begins to melt, I transfer the jar to the filter that came with the Freeze Dryer unit.  There the remainder of the oil drains from the jar along with the water as it melts.  Once there is a fair amount of oil in the Harvest Right filter it too will go into the freezer to remove the water.

Here is what it looks like after filtering

This is the exact same oil as shown in the first picture after it went through our toilet paper filtering system.  The difference is remarkable. One can see how much particulate matter was in that oil before filtering.  Clean and filtered vacuum pump oil generally should look like this amber color.  Some vacuum pump oil will be a different color, but this is what our Black Gold oil looks like.

Why filter vacuum pump oil 
Clean vacuum pump oil after filtering

So why filter vacuum pump oil?  doing so will reduce operating cost and help reduce expensive repairs to the vacuum pump.

Leave a Reply

Your email address will not be published. Required fields are marked *